Produse pentru magnet din (668)

Use as door stop is possible. It may be used in saunas or infrared cabins. Article number:FSW15-NdAGM6x23 Force* N:50 Weight g:10 Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F16-SCCvT D mm:16 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 d1 mm:3.5 +0.1/ -0.1 d2 mm:6.6 +1/ 0 Force* N:57 Weight g:Temperature °C Temperature °C:280

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets. Article number:F20C-4016 D mm:20 +0.1/ -0.1 H mm:6 +0.2/ -0.1 d1 mm:4.1 +0.4/ 0 d2 mm:9.4 +1/ 0 Force* N:22 Weight g:Temperature °C Temperature °C:220

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets. Article number:F25A-4016M5 D mm:25 +0.1/ -0.1 d mm:8 +0.2/ -0.2 H mm:7 +0.3/ -0.2 L mm:16 +0.5/ -0.3 Thread M:M5 Force* N:32 Weight g:20 Temperature °C:220

Bar magnet AlNiCo, steel body with fitting tolerance h6 Article number:S6P D mm:6 (h6) H mm:10 +0.2/ -0.2 Temperature °C:450

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F16C-v D mm:16 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 d1 mm:3.5 +0.2/ -0.2 d2 mm:6.5 +1.5/ 0 Force* N:14 Weight g:Temperature °C Temperature °C:200

Flat pot magnets hard ferrite, with cylinder bore Article number:F84C-Ks D mm:84 H mm:20 d1 mm:12 d2 mm:6.4 t mm:15 Force* N:650 Colour:black Weight g:470 Temperature °C:60

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10AG-vM3x7 D mm:10 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 L mm:7 +0.5/ -0.5 Thread M:M3 Force* N:Weight g Weight g:Temperature °C Temperature °C:200

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-NdAv D mm:6 +0.1/ -0.1 d mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 L mm:11.5 +0.2/ -0.2 Thread M:M3 Temperature °C:80

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes Article number:MS130NdSo00rh00 L mm:130 B mm:145 H mm:75 Temperature °C:80

Bar magnet NdFeB, steel body, zinc coated Article number:S4Nd D mm:4 +0.1/ -0.1 H mm:20 +0.2/ -0.2 A¹ mm:15 Force* N:2.5 Temperature °C:80

Bar magnet AlNiCo, steel body - with internal thread Article number:S6G D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 Thread MxL:M3x5 Force* N:Weight g Weight g:Temperature °C Temperature °C:450

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes Article number:MS130HFSo00rh00 L mm:130 B mm:145 H mm:75 Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F25-NdDvM4 D mm:25 +0.1/ -0.1 d mm:4.5 H mm:7 +0.2/ -0.2 Thread M:M4 Force* N:160 Weight g:24 Temperature °C:80

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A18D-KsM4 D mm:18 Thread M:M4 Force* N:25 Temperature °C:60

Magnetic system with stainless steel body and strong neodymium magnet core. This series have a deeper magnetic force than the classic flat pot systems. Two milled surfaces on the perimeter allow to fix the system with a tool. The holding surface is over molded with a hard type of rubber (TPE) and protects the magnet from strikes. At the same time the rubber effects a noise absorption. Article number:FG013NdAG06rh00 D mm:13 +0.2/ -0.2 H mm:16 +0.2/ -0.2 Thread MxL:M6x10 SW mm:11 b mm:Force* N Force* N:15 Weight g:13 Temperature °C:80

Bar magnets AlNiCo, steel body, zinc coated Article number:S6 D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 A¹ mm:12 Weight g:4.5 Temperature °C:450

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10-NdCv D mm:10 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 d1 mm:2.6 +0.1/ -0.1 d2 mm:5.2 +1/ 0 Force* N:19 Weight g:Temperature °C Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-SCBv D mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 Temperature °C:200

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets. Article number:F50C-4016 D mm:50 +0.2/ -0.1 H mm:10 +0.5/ -0.2 d1 mm:8.5 +0.2/ -0.2 d2 mm:22 Force* N:145 Weight g:85 Temperature °C:220

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F25D-vM4 D mm:25 +0.1/ -0.1 H mm:7 +0.3/ -0.2 K mm:5.2 Thread M:M4 Force* N:36 Weight g:18 Temperature °C:200

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12A-KsM4 D mm:12 L mm:14.5 Thread M:M4 Force* N:13 Temperature °C:60

Following standard colours are available ex stock » transparent: blue, yellow, green, orange, red, black, nature » completely coloured: blue, yellow, green, orange, red, black, white » no nickel – no allergy » attractive design » grip edge for easy detachment » magnets are protected and do not break (possible in case of raw magnets) » usable on both sides (for example for paperclips, pens, scissors) » top / bottom colour mix Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » higher holding force Article number:OM025NdRd00 D mm:25 Packaging unit:5 pieces

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12A-KwM4 D mm:12 L mm:14.5 Thread M:M4 Force* N:13 Temperature °C:60

Permanent-Magnettransporter werden da eingesetzt, wo schaltbare Lasthebemagnete wegen zu geringen Materialstärken nicht verwendet werden können. Sie sind geeignet für dünne Bleche ab 2 mm und sind kostengünstiger als Lasthebemagnete, müssen aber unter Zug mittels einer Abdrückvorrichtung vom Werkstück getrennt werden. Ihr Einsatz bietet sich im Blechlager, an der Brenn- oder Laserschneidanlage, an der Schere oder Stanzmaschine sowie im Stahl- und Behälterbau an. Magnettransporter der Typen SH und MK sind nicht mit der neuesten Europäischen Norm für Lasthebemagnete kompatibel. Wir empfehlen Ihre Anwendung nur in geschützten Bereichen.

Permanent-Magnetrundfutter vom Typ RNF mit Neodym Magnetsystem und geringer Bauhöhe werden zum Aufspannen von kleinen und dünnen Werkstücken verwendet. Aufbau — Neodym Magnetsystem, Stahlgrundkörper — Polteilung 1,5+0,5mm — Nennhaftkraft ca. 80 N/cm2 — Magnetfeldhöhe ca. 4mm — Abnutzbarkeit der Polplatte 4mm — Schaltweg MAG - ENT-MAG 135° Empfehlung Feinpoliges Rundfutter für kleine Teile

Systems for plugging into a groove that keep using locking lug without additional fastening. Article number:MBS56x12x12 H mm:12.2 L mm:56 l mm:53 B mm:12 b mm:11 t mm:2.2 Force* N:85 Weight g:24 Temperature °C:60

Das FX-HV Horizontal-Vertikalsystem wird mit seinen vielfältigen Einstellungsmöglichkeiten fast jedem Bedarf gerecht. Gesamthöhe und Schwerpunkt können über Steckbolzen eingestellt werden. Ebenso kann das Gerät für bis zu 20% seiner Nennlast auch ohne die untergreifenden Auflagen verwendet werden. Die Auflagebolzen sind so positioniert, dass stehende Ronden angeschlagen werden können, was z.B. an der Säge häufig gefordert wird. Ebenso können liegende Scheiben und Bleche aufgestellt werden. Zum horizontalen Transport hat das System auf der Rückseite eine Kranöse. Die Stahlkonstruktion ist komplett pulverbeschichtet, und der stabile FX Lasthebemagnet sorgt für maximale Sicherheit. Sonderabmessungen sind auf Anfrage lieferbar.

Batterie-Lasthebemagnete sind ortsunabhängig und flexibel wie Permanent-Lasthebemagnete und haben zugleich den Vorteil der Fernsteuerbarkeit und Bedienbarkeit per Knopfdruck. Sie werden vor allem dort eingesetzt, wo größere Lasten laufend umgeschlagen werden, da sie ohne körperliche Anstrengung geschaltet werden können. Ein weiterer, häufiger Anwendungsfall ist bei schlechter Zugänglichkeit des Aufsetzpunktes. Alle unsere Batterielasthebemagnete sind mit einer IR-Fernbedienung und einem hochwertigen, tiefentladungssicheren Gel-Akku ausgestattet. FBM-Lasthebemagnete entsprechen der neusten Norm und wurden nach den Hauptkriterien Sicherheit und Bedienkomfort konstruiert.

FXL-R runde Magnetspannplatten in Quadratpoltechnik eignen sich speziell zum Einsatz auf der Drehmaschine und auf Drehtischen von Bearbeitungszentren. Die Rahmenkonstruktion der FXL Platte kann sowohl vorne auf der Spannseite als auch hinten mit Zentrierelementen versehen werden. Alle FXL Magnetspannplatten lassen sich mit FXL-C oder FXL-CT Steuerungen bedienen.